Call us
 
     
   
     
Pacific Industrial Supplies Services
 
Home
About Us
Profile
Services
News & Events
Products
Book An Order
Feedback
Customers
Contact
Home » Products » Composite Hose
Composite Hose


CGG & CPG: Petroleum Hose and Non-Aggressive Chemical Hose
 

Inner Wire: G = Galvanized steel, P = Polypropylene coated steel; Outer Wire: G = Galvanized steel.

Liner: Polypropylene and polyester.

Application: Gasoline hose are capable of handling light distillates, diesel fuel, paraffin, kerosene, lubricating oils, 100% aromatics and black oils and heavy lubricants and solvents. Galvanized inner wire is not recommended for corrosive and aggressive chemicals. Refer to Chemical Compatibility Chart for specific recommendations.

Recommended For: Sizes 1" to 4" are designed for a wide range of petroleum, fuel, oil and lubricant applications where flexibility is essential, i.e. rail car and tank truck loading and delivery, storage tank transfer, refinery process, drumming, manifolding, batching and blending. 4:1 Safety Factor, ISO Approved.

** Note: CGG-400, 4" ID hoses are often used for bottom loading and are suitable for all hose loading arms. Fitted with fixed or floating TTMA flanged ends. Straight or 90 elbows are available.

Sizes 3" to 10" designed for dockside and marine terminal transfer of fuels, lubricants and aromatics at rated discharge or at full suction. Ideal hose for loading and unloading barges, tankers, bunkering service and other dockside operations at marine terminals. Spiral-wound inner and outer wires provide strength and flexibility to maintain hose integrity under stress and strain of ship and barge movement. IMO type approval for working temperatures -4F to +140F and pressure to 150 PSI. 5:1 Safety Factor, ISO Approved.




CSG & CSS; Chemical Hose for Handling 90% of Chemicals
 


Inner Wire: S = 316 Stainless steel; Outer Wire: G = Galvanized steel, S = 316 Stainless steel

Liner: Polypropylene and polyester.

Application: Chemical hose and acid hose are resistant to highly corrosive/aggressive chemicals. Capable of handling, alkalis, aldehydes, amines, aliphatic, aromatic fuels, chlorinated hydrocarbons, alcohol's, esters, ketones, lacquers and petroleum products at rated discharge pressure or at full suction. Not recommended for service of many bromide, chloride, or fluoride compounds.

Recommended For: Sizes 1" to 4" are more flexible and are essentially designed as utility chemical hose for chemical plants, refineries, paint producers, paper mills and many other in-plant, liquid transfer operations, also rail car loading and tank truck loading and delivery, storage tank transfer, refinery process, drumming, manifolding, batching and blending. 4:1 Safety Factor, ISO Approved.

Sizes 3" to 10" designed for loading and unloading barges, tankers, bunkering service and other dockside operations at marine terminals. Spiral-wound inner and outer wires provide strength and flexibility to maintain hose integrity under stress and strain of ship and barge movement. IMO type approval for working temperatures -4F to +140F and pressure to 150 PSI. 5:1 Safety Factor, ISO Approved.




CSG-xxx-T & CSS-xxx-T; Chemical Hose with PTFE & FEP Films for Handling 99% of Chemicals
 


Inner Wire: S = 316 Stainless steel; Outer Wire: G = Galvanized steel, S = 316 Stainless steel

Liner: PTFE-FEP.

Application: Chemical hose and acid hose are resistant to highly corrosive/aggressive chemicals. Generally used where the chemical resistance of polypropylene is inadequate. Chemicals include: butyl chloride, chlorosulphonic acid, oleum and pentachlorethane at rated discharge pressure or at full suction.

Recommended For: Sizes 1" to 4" are more flexible and are essentially designed as utility chemical hose for chemical plants, refineries, paint producers, paper mills and many other in-plant, liquid transfer operations, rail car loading and tank truck loading and delivery, storage tank transfer, refinery process, drumming, manifolding, batching and blending. 4:1 Safety Factor, ISO Approved.

Sizes 3" to 10" designed for loading and unloading barges, tankers, bunkering service and other dockside operations at marine terminals. Spiral-wound inner and outer wires provide strength and flexibility to maintain hose integrity under stress and strain of ship and barge movement. IMO type approval for working temperatures -4F to +140F and pressure to 150 PSI. 5:1 Safety Factor, ISO Approved.




CGG-xxx-VR, CSG-xxx-VR, CSS-xxx-VR; Vapor Hose
(Vapor Recovery Hose)
 


Inner Wire: G = Galvanized steel, S = 316 Stainless steel; Outer Wire: G = Galvanized steel, S = 316 Stainless steel

Liner: Polypropylene and polyester.

Color: High visibility yellow with required red, yellow, red bands marked "VAPOR" at both ends of hose assembly to USCG regulations.

Compliance: Meet or exceed the requirements of U.S. Coast Guard 33CFR,154.810, paragraph (d), vapor line connections.

Vapor Hose Handles: Chemical and hydrocarbon vapors and 100% aromatics

Recommended For: The recovery of volatile hydrocarbon vapors in rail car and truck loading terminals, and unloading at service stations. Designed for compliance with EPA Stage 1 requirements for recovering volatile hydrocarbon vapors in rail car and tank truck loading at bulk terminals, and unloading at service stations. Designed to meet the demands for light weight, flexibility and strength imposed on these hoses in the marine environment in vapor recovery operations. Designed to meet USCG requirements for recovering certain chemical and volatile hydrocarbon vapors during ship and barge loading at bulk storage terminals, plants, refineries and other transfer operation in a marine environment. IMO type approval for working temperatures -4F to +140F and pressure to 25 PSI. 5:1 Safety Factor, ISO Approved.




Specialty Composite Hoses
CSS-xxx-PC; Submersible Plain Cover Chemical Hose
 


Inner Wire: S = 316 Stainless steel; Outer Wire: S = 316 Stainless steel

Liner: Polypropylene fabrics.

Cover: Polypropylene.

Recommended For: Immersion in chemicals or oils for suction and discharge with portable pumps.

CCSS: Cryogenic Hose

Inner Wire: S = 316 Stainless steel; Outer Wire: S = 316 Stainless steel

Liner: Polyester, polyamide.

Carcass: Multiple layers of low temperature thermoplastic fabrics and films.

Cover: Polyester fabric cover. Rope wrapping for extra protection and insulation available.

Temperature & Range: -200C to +80C, refer to Chemical Compatibility Chart.

Conveyants Handled: Compatible with a wide range of low temperature fluids including the following per IMO Gas Carrier Code, Chapter XIX: Butadiene, Butane/Propane mixture, Butylene, Diethylamine, Ethylamine, Ethyl Chloride, Methyl Acetylene/Propadiene, Methyl Bromide, Propane, Propadiene, Polypropylene, Refrigerant Gasses, Vinyl Chloride. Liquefied Natural Gas (LNG) and Liquid Nitrogen.

Certification: Bore sizes 4", 6" and 8" are certified as complying with paragraphs 5.7 of IMO Gas Carrier Code and 5.3 and 5.7 of IMO Chemical Carrier Code for working temperatures to -155F (-104C).

Recommended For: And designed specifically for the transfer of fully refrigerated liquefied petroleum gasses and related conveyants to -328F(-200C).




CGG-xxx-M; MTBE & Petroleum Hose
 


Inner Wire: G = Galvanized steel; Outer Wire: G = Galvanized steel

Liner: Polypropylene and polyamide.

Application: Gasoline hose, MTBE hose, and unleaded gasoline hose are not recommended for corrosive and aggressive chemicals. Refer to Chemical Compatibility Chart for specific recommendations.

Recommended For: Sizes 1" to 4" are designed for a wide range of fuel and oil where hose flexibility is essential, i.e. rail car and tank truck loading and delivery, storage tank transfer, refinery process, drumming, manifolding, batching and blending. 4:1 Safety Factor, ISO Approved.

Sizes 3" to 10" designed for dockside and marine terminal transfer of fuels, lubricants and aromatics at rated discharge or at full suction. Ideal hose for loading and unloading barges, tankers, bunkering service and other dockside operations at marine terminals. Spiral-wound inner and outer wires provide strength and flexibility to maintain hose integrity under stress and strain of ship and barge movement. IMO type approval for working temperatures -4F to +140F and pressure to 150 PSI. 5:1 Safety Factor, ISO Approved.




CGG; Bottom Loading Hose
 


Inner Wire:
G = Galvanized steel; Outer Wire: G = Galvanized steel.

Liner: Polypropylene and polyester.

Application: Light distillates - gasoline hose, diesel fuel hose, paraffin, kerosene, lubricating oils, 100% aromatics and black oils and heavy lubricants and solvents. Not recommended for corrosive and aggressive chemicals. Refer to Chemical Compatibility Chart for specific recommendations.

Recommended For: 4" ID hoses are often used for bottom loading and are suitable for all hose loading arms. Can be fitted with fixed or floating TTMA flanged ends. Straight or 90 elbows are also available.




FIRESAFE MTBE & Petroleum Hose
 


FIRESAFE composite hose utilize a series of non-asbestos barriers to conductive and radiative heat to achieve outstanding fire retardant ability. After 30 minutes of severe fire attack, the hose carcass is still intact and capable of holding product. Even after loss of integrity, this hose will not fail catastrophically, instead it will gradually burn off the product as it presents itself to atmosphere.

Inner Wire: G = Galvanized steel; Outer Wire: G = Galvanized steel

Liner: Polypropylene and polyamide.

Application: Gasoline hose, MTBE hose, and unleaded gasoline hose are also suitable for diesel fuel, paraffin, kerosene, lubricating oils, 100% aromatics and black oils and heavy lubricants and solvents. Not recommended for corrosive and aggressive chemicals. Refer to Chemical Compatibility Chart for specific recommendations.

Recommended For: Sizes 1" to 4" are designed for a wide range of fuel, oil and lubricant applications where flexibility is essential, i.e. rail car and tank truck loading and delivery, storage tank transfer, refinery process, drumming, manifolding, batching and blending. 4:1 Safety Factor, ISO Approved.

Sizes 4" to 10" designed for dockside and marine terminal transfer of fuels, lubricants and aromatics at rated discharge or at full suction. Ideal hose for loading and unloading barges, tankers, bunkering service and other dockside operations at marine terminals. Spiral-wound inner and outer wires provide strength and flexibility to maintain hose integrity under stress and strain of ship and barge movement. IMO type approval for working temperatures -4F to +140F and pressure to 150 PSI. 5:1 Safety Factor, ISO Approved.


     
     
Home  I   About us  I   Book An Order  I   Products  I   Services  I   Customers  I   Feedback  I   FAQs  I   Contact  I   Legal Notes  I   Privacy Policy